ANWARUL HAQUE

Associate Professor

Department of Aerospace Engineering and Mechanics

The University of Alabama, Tuscaloosa, Al-35487

Email : ahaque@coe.eng.ua.edu, Tel : (205) 348 2694, Fax : (205) 348 7240

 

TEACHING INTERESTS

Graduate and undergraduate courses in solid mechanics, design and materials engineering

RESEARCH INTERESTS

Computational Stress Analysis, Fracture and Damage Mechanics, High velocity Impact and High Strain Rate Testing,  Materials  Characterization and  Fracture Analysis  of  Composites and Nanostructured  Materials.

EDUCATION

Ph.D.               Auburn University, Alabama, December 1995

Major :            Mechanical Engineering (Applied Mechanics); Minor: Materials Engineering (Composites)

 

EXPERIENCE

Associate Professor (August 2001 – Present ) Aerospace Engineering and Mechanics, The University of Alabama, Tuscaloosa.  Teaching graduate and undergraduate courses and conducting research in solid mechanics and composite materials

Assistant Professor (August 1996- April 2001) / Associate Professor (May 2001-August 2001)  : Mechanical Engineering Department, School of Engineering, Architecture & Physical Science, Tuskegee University, Alabama.  Teaching graduate and undergraduate courses and conducting research in solid mechanics, design and  materials engineering.

Research Assistant Professor (Jan. 1996-Aug. 1996) : Tuskegee University Center for Advanced Materials (T-CAM). Tasks involve conducting both analytical and experimental research in stress analysis, fracture mechanics and damage in composite structures,  writing proposal  and preparing technical reports for funded research projects.

 

COURSES TAUGHT :

Graduate : Composite Materials, Thermodynamics of Materials, Microstructural Analysis of Materials

Undergraduate : Statics, Dynamics,  Mechanics of Materials, Machine Design, Materials Engineering, Physical Metallurgy, Engineering Graphics, Freshman Design, Testing and Design of Aircraft Structures

 

FUNDED RESEARCH PROJECTS

 

1.                  “ Survivability of Affordable High Temperature Polymer Matrix Composites for  Propulsion Engine Components” , NASA Glenn Research Center, $ 300,000, 2001-2004, PI

2.                  “ Acquisition of a High Speed Imaging System for Dynamic Characterization of Advanced Materials”, Office of Naval Research , $ 200,000, 2001-2002, PI

3.                  “High Temperature Fatigue and Creep Behavior of Ceramic Matrix Composites for Engine Nozzle Applications”, NASA Lewis Research Center, $ 362,453, 1998-2000, PI

4.                  “Beta Factor Calculation for F-77 Fuasalage” Mercer Research Corporation, $ 64, 348, August – December 2000, PI

5.                  “Performance Evaluation and Failure Analysis of Liquid Molded Composites” National Science Foundation, $ 600,000, 1997-2002, PI for Technical Component IV.  Total Project funding for the Center $ 5 million

6.                  “Intelligent Resin Transfer Molding for Integral Armor Applications” Army Research Office, Total funding for the Center $ 5.4 million, 1995-2000 ,Co-PI

7.                  “Ballistic Performance of Polycarbonate and Fiber Glass Composites”, Wright Patterson Air Force Base, $ 25,000, 1998-1999, Co-PI

8.                  “Advanced Sandwich Constructions for Sea Structures”, Office of Naval Research, $ 303,891, 1998-1999, Co-PI

 

TECHNICAL  REPORTS

 

1.                  A. Haque, M. Rahman, L. Ahmed, H. Mahfuz, S, Jeelani, O. Tyson and T. Ware, " Tensile and Fatigue Behavior of SiC/SiNC Ceramic Matrix Composites at Room and Elevated temperatures, NASA Glenn Research Center, January 2000

2.                  A. Haque and R. Prashed, " Beta Factor Development for Several Locations in the C-130H Fuselage", Mercer Research Engineering Center, December 2000

3.                  A. Haque and J. K. Johnson, "Static Compression and Compression-Compression Fatigue Behavior of S2-Glass/Vinylester Composites", Army research Office (ARO), February 1998

4.                  A. Haque and M. Ali, " Rate Dependent Compressive Response of S2-Glass/Vinylester Composites" , Army Research Office (ARO), February 1998

5.                  A. Haque, H. Mahfuz, N. McDowell, N. Wilkins, M. Rahman, L. Ahmed, "Tensile and Fatigue Behavior of SiC/SiNC Ceramic Matrix Composites at Room and Elevated Temperature - An Experimental and Finite Element Study", NASA Technical Memorandum, HSR069, June 1999

6.                  H. Mahfuz, Y. Zhu, A. Haque, A. Abutalib, U. Vaidya and S. Jeelani, " Investigation of High Velocity Impact on Integral Armor Using Finite Element Method" Army Research Office (ARO), June 1998

7.                  S. Jeelani, H. Mahfuz, A. Haque, U. Vaidya, D. Robinson, A. Walker, C. Inglis and C. Chestang," Instrumentation for Fatigue and Compression Characterization of Advanced Composites". Office of Naval research (ONR), February 1997

8.                  S. Jeelani, H. Mahfuz, U. Vaidya, A. Haque, S. Sodah, K. Eltom, K. Fotedar, E. Foster, "Advanced Composites for Sea Structures", Office of Naval Research (ONR), February 1997

9.                  H. Mahfuz, S. Jeelani, A. Haque, D. Yu, D. Robinson, “ Behavior of Resin Transfer Molded Composites under Reversed Cyclic Loading” Composite Research, 3M Corporation, St. Paul, MN 55144-1000, March 1994

10.              S. Jeelani, H. Mahfuz, A. Haque, T. X. Yu, “ Mechanical Property Testing of Resin Transfer Molded Materials” , McDonnell Douglas Missile Systems Company, WA-HARP-3127, May 1993

11.              N. Haque, S. Salekeen, A. Haque, D. P. Zadoo and  S. Jeelani, “ Chracterization of Ceramic/Ceramic Composites”  Office of Naval Research, TU-ONR/URI-3/C, Sept. 1989

12.              A. Haque, S. Mahmood, L. Walker and S. Jeelani, “ Moisture and Temperature Induced Degradation in Tensile Properties of Kevlar-Graphite/Epoxy Hybrid Composites” Office of Naval Research, TU-ONR/URI-3/B, Sept. 1989

13.              A. Haque, D. P. Zadoo, C. W. Copeland, “ Hygrothermal Influence on Flexural Properties of Kevlar 49- Graphite/Epoxy Hybrid Composites, TU-ONR/URI-2/E

 

PUBLICATIONS

 

A.            Refereed Publications

 

1.         A . Haque, C.W. Copeland, D.P Zadoo and S. Jeelani, “Hygrothermal Influence on Flexural Properties of Kevlar- Graphite/Epoxy Hybrid Composites”,  Journal of Reinforced Plastics and Composites,  Vol. 9-November 1990, pp. 602-613

 

2.         A . Haque, L. Mooreheed, D.P. Zadoo and S. Jeelani, “Hygrothermal Influence on Interlaminar Shear Strength of Kevlar- Graphite/Epoxy Hybrid Composites”, Journal of Materials Science, 25(1990), pp. 4639-4643

 

3.         A . Haque, S. Mahmood, L. Walker and S. Jeelani,” Moisture and Temperature Induced Degradation in Tensile Properties of Kevlar- Graphite/Epoxy Hybrid Composites”, Journal of Reinforced Plastics and Composites,  Vol.10-March 1991, pp. 132-145

 

4.         A . Haque and S. Jeelani, “Environmental Effects on the Compressive Properties: Thermosetting vs. Thermoplastic Composites”, Journal of Reinforced Plastics and Composites,  Vol. 11/February 1992, pp.146-157

 

5.         S. Salakeen, A. Haque, J.S. Copes, Hassan Mahfuz and Shaik Jeelani, ‘Effects of Reinforcement Geometry on the Mechanical Properties of SiCW/Al2O3 Composites”, Composites Engineering, Vol.2, No.4, 1992, pp. 239-247

 

6.         N. Huq, A. Haque and S. Jeelani, “ Fracture Toughness Measurement on SiCW/ Al2O3 Composite” Journal of Materials Science, 27 (1992), pp. 5989-5993

 

7.                  A. Haque, J. Krishnagopalan and S. Jeelani, “Fatigue Damage in Laminated Composites”, Journal of Reinforced Plastics and Composites,  Vol. 12, No.10, Oct. 1993, pp. 1058-1069

 

8.                  A. Haque and P. K. Raju, “ Acoustic Impact Technique for Characterizing Defects in Laminated Composites” DE-Vol.62, Vibration Isolation, Acoustics and Damping in Mechanical Systems, ASME 1993, pp. 111-116

 

9.                  A. Haque, H. Mahfuz, C. Ingram and S. Jeelani, “ Thermoplastic Composites under Compressive Loading- An Experimental and Finite Element Study”, Composite Engineering, Vol. 4, No.6, 1994, pp.637-651

 

10.              A. Haque and P. K. Raju, “ Monitoring Fatigue Damage in Carbon Fiber Composites using Acoustic Impact Technique”, NCA-Vol. 18/DE-Vol 80, Materials for Noise and Vibration Control, ASME 1994, pp. 53-63

 

11.       A. Haque and P. K. Raju, “ Sensitivity of the Acoustic Impact Technique in Characterizing Defects/Damage in Laminated Composites” Journal of Reinforced Plastics and Composites,  Vol. 10/Number 3/March 1995, pp. 280-296

 

12.              H. Mahfuz, M. Muniruzzaman, J. Krishnagopalan, A. Haque, M. A. Ismail and S. Jeelani, “Effects of Stress Ratio on Fatigue Life of Carbon -Carbon Composites” Theoretical and Applied Fracture Mechanics 24 (1995), pp. 21-31

 

13.       H. Mahfuz, M. C. Saha, A. Haque, U.K. Vaidya, D. Yu and S. Jeelani, ”Fatigue Damage and Residual Strength Evaluation of Resin Transfer Molded (RTM) Composites under Reversed Cyclic Loading”, NCA-Vol.20./AMD-Vol.211, Innovative Processing and Characterization of Composite Materials, ASME 1995, pp. 77-88

 

14.       A. Haque and P.K. Raju, “Impact Induced Delamination in Composite Materials- An Experimental and Finite Element Study” NCA-Vol.20./AMD-Vol.211, Innovative Processing and Characterization of Composite Materials, ASME 1995, pp. 65-75

 

15.       A. Haque And P.K. Raju, “Theoretical Investigation of Impact Responses for Nondestructive Evaluation of Composites” NCA –Vol.23, Advanced Materials for Vibro-Acoustic Applications, Vol.2, ASME 1996, pp. 135-149

 

16.              H. Mahfuz, A. Haque et al., “Response of Resin Transfer Molded(RTM) Composites under Reversed Cyclic Loading”, Journal of Engineering Materials and Technology, Transactions of the ASME, Vol. 118, January 1996, pp. 21-31

 

17.              U.K. Vaidya, A. Haque, K. Fotedar, H. Gajiwala, H. Mahfuz, and S. Jeelani, “Tensile and Compression Performance-NDE Relationships of Glass/Epoxy Composites Fabricated Through Rapid Fabric Wetting Resin Infusion Process” NCA-Vol.23, Advanced  Materials for Vibro-Acoustic Applications, Vol. 2, ASME 1996, pp. 151-158

 

18.              U.K. Vaidya, P.E. Dadzie, A. Haque, K. Fotedar, H. Gajiwala, H. Mahfuz, and S. Jeelani, “Nondestructive Evaluation/Characterization of Short Fiber Modified Carbon Phenolic and Carbon/Carbon Textile Composites” Journal of Reinforced Plastics and Composites, Vol.16, No. 11, 1997, pp. 968-1001 

 

19.              A. Haque, J. Johnson, U. Vaidya and S. Jeelani, “ Fatigue Damage in S2-Glass/Vinyl Ester Thick Composites” NCA-Vol.24, ASME 1997, pp. 247-257

 

20.              A. Haque and P.K. Raju, “Acoustic Impact Technique in Identifying Fatigue Damage in Composite Materials”, Materials Evaluation, Vol. 56/Number 6, June 1998, pp.765-770 

 

21.              H. Mahfuz, W. Mamun, A. Haque, U. Vaidya and S. Jeelani,” Stress Wave Propagation through Fiber and Matrix in a Cylindrical Composite Coupon”, “Physics and Modern Topics in Mechanical and Electrical Engineering (ISBN:960-8052-10-6), World Scientific and Engineering Society Press, pp. 151-158, 

 

22.              H. Mahfuz , A. Haque et al. “Investigation of High Velocity Impact on Integral Armor Using Finite Element Method” International Journal of Impact Engineering 24 (2000),  pp. 203-217

 

23.              H. Mahfuz, A. Haque et.al, “ An Innovative Technique for measuring the high Strain Rate Response of Sandwich Composites”, Composite Structures, 50 (2000)  pp. 279-285

 

24.       H. Mahfuz, A. Haque et. al, “Fatigue Life Prediction of Thick-Section S2-Glass/Vinyl-Ester Composites under Flexural Loading, “ Transaction of ASME, Journal of Engineering Materials and Technology, October 2000, Vol. 122

 

25.              A. Haque and M. Rahman, “Durability and Damage Development in Woven Ceramic Matrix Composites under Tensile and Fatigue Loading at Room and Elevated Temperatures” Journal of Engineering Materials and Technology, October 2000, Vol. 122 , pp. 394 - 400

 

26.              H. Mahfuz, W. Mamun, L. Austin, A. Haque and S. Jeelani, “ New Formulations for Hopkinson Bar Technique to Extract Constituent Material’s  Response in Composite Specimen, “ Journal of Materials : Design and Applications, (in press)

 

27.              A. Haque and L. Ahmed, “Notch Sensitivity of Woven Ceramic Matrix Composites – An Experimental, Analytical and Finite Element Study”, Journal of Composite Materials (Under preparation)

 

28.              A. Haque and K. Hossain, “ Effects of Moisture and Temperature on High Strain Rate Responses of S2-Glass/Vinyl Ester Composites”, Journal of Engineering Materials and Technology (Under Preparation)

 

 

B.             Conference Publications

 

 

29.              A. Haque, G. Grant, H. Mahfuz and S. Jeelani, “Fracture Behavior of SiCfSi3N4 Composites”-An Experimental and Finite Element Study, International Conference on Composites Engineering, ICCE/1, August 1990, New Orleans, pp.319-320

 

30.       H. Mahfuz, A. Haque et al. “Response of Resin Transfer Molded Carbon Fiber Composites under  Compression and Reversed Cyclic Loading”, Proceedings of International Conference on Design and Manufacturing using Composites (ATMAM’90), Montreal, August , 1990

 

31.       P.K. Raju, L.Y. Huang and A. Haque, “Mechanics of Acoustic Impact Technique”, The American Society of Nondestructive Testing, ASNT, 1990 Fall Conference, Atlanta, Georgia

 

32.       A. Haque, H. Mahfuz, T.X. Yu and S. Jeelani, “Effect of Processing Parameters on Property Changes of Resin Transfer Molded Materials” Proceedings of 25th International SAMPE Technical Conference, Oct. 1993, pp. 305-317

 

33.              U.K. Vaidya, A. Haque, H. Mahfuz, and S. Jeelani, “Effect of Short Fiber Reinforcement Modification and Fabric Architecture on Ultrasonic and Acoustic Emission Parameters of Carbon/Phenolics and Carbon/Carbon Composites” The American Society of Nondestructive Testing (ASNT) Spring Conference, March 20-24, 1995, Las Vegas, Nevada, pp. 244-248

 

34.       A. Haque, U.K. Vaidya, H. Mahfuz, And S. Jeelani,” Nondestructive Evaluation (NDE) of Thick Section Composites under Static Compression and Compression -Compression Cyclic Loading”, Proceedings of 10th World Conference on Nondestructive Testing, New Delhi, India, December 8-13, 1996, pp. 50-54

 

35.       U.K. Vaidya, A. Haque, H. Mahfuz, and S. Jeelani,” Process Related Defect and High Strain Rate Impact Damage Evaluation of Resin Transfer Molded Composites through a Comprehensive NDE Approach” Proceedings of 10th World Conference on Nondestructive Testing, New Delhi, India, December 8-13, 1996

 

36.              A. Haque, H. Mahfuz, U.K. Vaidya and S. Jeelani, “Effects of Fiber Orientations on High Strain Rate Behavior of Glass/Epoxy Composites”, Proceedings of 28th International SAMPE Technical Conference, Seattle, Washington, November 3-7, 1996, pp. 586-595

 

37.              U. Vaidya, H. Mohammed, K. Fotedar, A. Haque, H. Mahfuz and S. Jeelani, “ Sensor-Property- NDE Relationships of Polymeric Composites Processed through Resin Infusion”, Smart Materials, Structures and MEMS, SPIE-96, India, December 1996

 

38.       A. Haque,  J. Johnson, U. Vaidya, H. Mahfuz & S. Jeelani, “ Static Compression and  Compression/Compression Fatigue Behavior of S2-Glass/Vinyl Ester  Composites”,  Fourth International Conference on Composites Engineering, Hawaii, July 6-10, 1997, pp. 407-408

 

39.              A. Haque, M. Ali, U. K. Vaidya, H. Mahfuz and S. Jeelani, “ Rate Dependent Compressive Behavior of  S2-Glass/Vinyl Ester Composites”,  Proceedings of 29th International SAMPE Technical Conference,  Orlando, October 29-November 1, 1997, pp. 698-712

 

40.              H. Mahfuz, B. Gama, R. Raines, A. Haque and S. Jeelani, “Finite Element Modeling of the High Strain Rate Behavior of S2-Glass/Vinyl Ester Composites under Compressive Loading”, Proceedings of 11th International Conference on Composite Materials (ICCM-11), Melbourne, Australia, July 1997, Vol. V, pp. 819-829

 

41.              H. Mahfuz, B. Gama, R. Raines, A. Haque, U. Vaidya and S. Jeelani, “ High Strain Rate Behavior of the Component Materials of an Integral Armor”, Proceedings of 29th InternationalSAMPE Technical Conference, Orlando, Oct. 29-Nov.1, 1997, pp. 614-624

 

42.              U. Vaidya, K. Krishnagopalan, A. Haque, H. Mahfuz and S. Jeelani, “ Nondestructive Characterization and Low Velocity Impact Response of Integral Armor Components”, Proceedings of Fourth International Conference on Composites Engineering, Hawaii, July 6-10, 1997, pp. 1009-1010

 

43.              A. Haque, M. Rahman, H. Mahfuz and S. Jeelani, “ An Experimental and Numerical Study of the Compressive Failure Behavior of Woven Textile Composites”, Proceedings of the Symposium on the Mechanics of Solids and Structures, Canadian Society of Mechanical Engineers (CSME), May 19-22, 1998, Toronto, Canada, pp. 202-209

 

44.              S. F. Ali, D. Ezell, J. P. Williams, A. Haque and P. K. Ray, “ Mechatronics Concepts in a Freshman Design Course”, Canadian Society of Mechanical Engineers (CSME), Toronto, Canada, May 1998

 

45.              A. Haque, M. Rahman, U. Vaidya, H. Mahfuz and S. Jeelani, “ Tensile Behavior of Woven Ceramic Matrix Composites at Room and Elevated Temperature – An Experimental and Numerical Study”  Key Engineering Materials. Vols. 164-165 (1999) , 1999 Trans Tech Publications, Switzerland, pp.341-344

 

46.              A. Haque, U. K. Vaidya, M. Kulkarni, R. Kulkarni, “ Influence of  Polycarbonate on the Ballistic Performance of S2-Glass/Epoxy Reinforced Composites”,  Proceeding of the International Conference on Advanced Composites, Hurghada, Egypt, December 15-18, 1998, pp. 17-27

 

47.              U. K. Vaidya, A. Haque, M. V. Hosur, M. Kulkarni, A. Mayer & P. Dutta, “ High Strain Rate Impact Response of Polycarbonate Backed Composite Laminates” Proceeding of the International Conference on Advanced Composites, Hurghada, Egypt, December 15-18, 1998, pp. 3-16

 

48.              H. Mahfuz, M. Rahman, A. Haque, E. Foster, U. Vaidya & S. Jeelani, “ Static Buckling Analysis of Isogrid Cylinders using Finite Element Approach”, Proceeding of the International Conference on Advanced Composites, Hurghada, Egypt, December 15-18, 1998, pp. 673-679

 

49.              A. Haque, A. Abutalib, K. Rahul, U. K. Vaidya, H. Mahfuz and S. Jeelani, “ Ballistic Performance of Monolithic Ceramic Backed by S2-Glass/Vinyl Ester Composites” 12th International Conference on Composite Materials, Paris, France, July 5-9, 1999, Release 2 January 2000 (CD ROM)

 

50.              A. Haque, M. Rahman and  S. Jeelani, “Fatigue Damage in Woven Ceramic Matrix Composites”,  Proceedings of the Fourth International Conference on Durability Analysis of Composite Systems-DORACOSYS 99/ Brussels/Belgium/ July 11-14, 1999 , pp. 133-139

 

51.              A. Haque and R. Prashed “ Dynamic Deformation of Ceramic Faced Composite Armor under High Velocity Impact Loading ” Proceedings of the Second International Symposium on Impact and Friction of Solids, Structures and Intelligent Machines, Montreal, Quebec, Canada, August 8-12, 2000

 

52.              A. Haque, M. Rahman, H. Mahfuz and S. Jeelani, “ Fatigue Life Prediction and Damage development in Woven Ceramic Matrix Composites” Transactions of the AUSTCERAM 2000, International Ceramics Conference, University of Technology, Sydney, Australia, June 25-28, 2000, pp. 183

 

53.     A.Haque, R. Kulkarni, H.Mahfuz and S. Jeelani, “High Velocity Impact Responses of Polymer Composites –An Experimental and Finite Element Study”, Thirteen International Conferences on Composite Materials,  Beijing, China,June 25-29, 2001

 

54.              F. Hussain, A.Haque, D.Dean, “Effects of  Nano Clay Particles in Thermal and Mechanical Properties of Polymer Matrix Composites”, The Second Georgia Tech Conference on Nanoscience and Nanotechnology, Atlanta, Georgia,  Sept 19- 21, 2001

 

55.              A. Haque, L. Ahmed and S. Jeelani, “ Notch Sensitivity of Woven Ceramic Matrix Composites under Tensile Loading – An Experimental, Analytical and Finite Element Study”, High Temperature Ceramic Matrix Composite Conference ,  Munich, Germany, Oct. 1-3, 2001

 

 

PROFESSIONAL  AFFILIATIONS

 

Chairman, ASME Chattahoochee Section  (1998-Present)

Member : Composite Committee, American Society of  Mechanical Engineers

American Society of  Mechanical Engineers (ASME)

American Society of  Ceramic Materials (Acerm.)

American Society of  Nondestructive Testing (ASNT)

Society of Advanced Manufacturing & Processing of Composite Materials (SAMPE)

 

EDITOR

 

Journal of Engineering Materials and Technology, October 2000, Vol. 122, Transactions of the ASME

Durability and Damage Tolerance of Composite Materials and Structures- 1999, MD-Vol. 86, AMD-Vol.232, Sponsored by the Materials Division, ASME and the Applied Mechanics Division of ASME

 

 

 

 

 

 

.